The Difference Between Wholesale Fftp Cat6a Cables

  •  

    What applications are running on the Cat6A Ethernet cable?
    Cat6A Ethernet cables are a forward-looking choice for PoE devices with higher power requirements, where thicker shields, wider frequencies and speeds facilitate the data required by smart technology without heating the cable and causing downtime. Administrators often use Cat6A cables to reduce DC resistance and the resulting power loss while maintaining performance. Due to higher bandwidth compatibility, Cat6A cables are very suitable for pairing with fiber optic cable installations. With the potential for higher speed and less crosstalk, Cat6A will lead enterprise IT networks and homeowners to easily complete the next few technological updates.

    Among the three Ethernet cables introduced in our "Know Your Cable" series, Cat6A has the most flexible deployment because of its potential compatibility with future low-power devices (PD), such as next-generation smart TVs and virtual assistants , LED smart lighting, smart video doorbell and thermostat.

    What is the difference between Cat6A and ordinary Cat6
    According to ANSI/TIA 568 C.2, Cat6A (link to our post) doubles the operating frequency of the cable from 250 MHz to 500 MHz, and supports a bandwidth that is 10 times higher (10 Gigabit) than regular Cat6, up to 100 meters. Cat6 cabling also supports 10 Gigabit Ethernet, but only supports 110 feet (normal), and may also support 165 feet (depending on the situation). Why?

    Wholesale FFTP CAT6A Cables' Cat6A cable specification is 23 AWG, which is the same as Cat6, but adopts a structure strategy such as a thicker shell and tighter copper wire than Cat 6, providing more copper wire per inch. It is more enthusiastic than the ordinary Cat 6, but more copper means more money. The big decision about whether to use the more expensive Cat6A becomes simple. Is your PD over 110 feet? If yes, please use Cat6A. Even if there is a possibility of mixing or longer distances due to low crosstalk conditions, please use Cat6A. In the long run, it will alleviate a lot of trouble.

    Cat6A cables also have a stronger sheath, which improves the signal-to-noise ratio (SNR) of Cat6. ANSI/TIA specifies that Cat6A cables support frequencies up to 500 MHz, while Cat6 cables support bandwidth frequencies up to 250 MHz. The Cat5e specification is a trivial 100 MHz.