shanhe1014's Album: Wall Photos

Photo 1 of 1 in Wall Photos

Custom Condenser Coils Manufacturer Introduces The Workflow

Condensers such as Custom
Condenser Coils and boiler condensers can be used. A condenser for a boiler is also called a flue gas condenser. After the boiler uses a flue gas condenser, it can effectively save production cost, reduce boiler exhaust gas temperature, and improve boiler thermal efficiency. Make the boiler operation meet the national energy-saving emission reduction standards.

In traditional boilers, after the fuel is burned in the boiler, the exhaust gas temperature is relatively high, and the water vapor in the flue gas is still in a gaseous state, which will take away a lot of heat. Among various fossil fuels, natural gas has the highest hydrogen content, and the mass percentage of hydrogen is about 20% to 25%. Therefore, the exhaust smoke contains a large amount of water vapor. According to calculations, the steam produced by burning 1 square meter of natural gas requires The calorie paper taken away is 4000KJ, which is about 10% or more of its high calorific value.

The flue gas condensation waste heat recovery device uses lower temperature water or air to cool the flue gas to reduce the flue gas temperature. Close to the heat exchange surface area, the water vapor in the flue gas condenses, and at the same time realizes the sensible heat release of the flue gas and the latent heat of water vapor condensation Release, and the water or air in the heat exchanger absorbs heat and is heated to realize heat recovery and improve the thermal efficiency of the boiler.
You can learn more from the URL below:https://www.sailcoils.com/product/condenser-coils/